SCREW EXTRACTOR NO.2 CARDED
TorkCraft - Screw Extractor
Size: M6 - M8
Diameter: 3 0mm
Recommended Drill Size: 4.2 mm
Shank: 4.0mm Square Shank
Application:
The Tork Craft Screw Extractor is for the removal of broken bolts and studs,
made of carbon steel. Determine the size of the bolt and the desired
extractor size, use a file and flatten the broken bolt surface, usually
bolts that broke are left with an uneven surface.
Locate the center on the flattened surface and mark with a center punch.
Drill a pilot hole, start off with a small diameter and increase to the
recommended drill size depending on the extractor size in use.
Insert the extractor into the pilot hole and using a tap wrench the bolt can
now be extracted carefully, by turning the screw extractor anti-clockwise.
Carbon Steel
Quick & Easy removal of broken bolts and studs
Recommended tap wrench:
NR9001C
NR9002C
NR9003C
NR9006C
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.