SCREW EXTRACTOR NO.1 CARDED
TorkCraft - Screw Extractor
Size: M3 - M6
Diameter: 2 mm
Recommended Drill Size: 3.2 mm
Shank: 3.5mm Square Shank
The Tork Craft Screw Extractor is for the removal of broken bolts and studs,
made of carbon steel. Determine the size of the bolt and the desired
extractor size, use a file and flatten the broken bolt surface, usually
bolts that broke are left with an uneven surface.
Locate the center on the flattened surface and mark with a center punch.
Drill a pilot hole, start off with a small diameter and increase to the
recommended drill size depending on the extractor size in use.
Insert the extractor into the pilot hole and using a tap wrench the bolt can
now be extracted carefully, by turning the screw extractor anti-clockwise.
Quick & Easy removal of broken bolts and studs
Recommended tap wrench:
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
We Also Recommend
DEWALT Angle Grinder 115mm 800W with Free Glasses and Gloves | DWE4050G-ZA