7' 178MM POLISHING BONNET WOOL

Tie on polishing wool buff

Diameter: Ø180mm
Use backing pad:

PG33805

Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is
the same as the backing pad's diameter.

It is necessary to polish a vehicle body panel when:

The panel has been newly painted with a clear-coat.
Shallow scratch marks need to be removed.
The panel has suffered from oxidation.
Swirl marks and hologram defects need to be removed.

TIP:
The buff is washable after use if the polishing compound is soluble.

Tie on polishing wool buff range:

ORDER NO.
DIAMETER
USE BACKING PAD



MM4
ø100mm





MM5
ø125mm


TCBP125C /

PG338




MM6
ø150mm


TCBP150C




MM7
ø180mm


PG33805




MM7-2
ø180mm


PG33805




MM8
ø200mm





MM9
ø230mm





MM9-2
ø230mm





MM10
ø250mm

Recommended polishing compounds to use:

Liquid Shine™
High cut - Features a silicone, wax and filler free polishing
compound to give a high gloss finish on fresh or cured paint. It is capable
of removing P1500 grit sanding marks. It can be used on automotive paints,
marine gel-coats and on composite surfaces.

Liquid Shine™
Fine cut - similar to the High cut polishing compound, but it
is designed for use on a ceramic and scratch resistant clear-coat. It is
capable of removing P2000 scratch marks.

Liquid Shine™
Zero swirl - Very low abrasive for the final step of polishing.
Removes holograms and swirl marks. Use a soft compounding sponge as a final
step