![MASONRY DRILL BIT 20 X 400MM](http://www.takeatool.com/cdn/shop/products/DR83200_{width}x.jpg?v=1652283336)
MASONRY DRILL BIT 20 X 400MM
Drill bit for Masonry
Drill diameter: Ø20.0mm
Length: 400mm
Drill bit: TCT (Tungsten carbide tipped)
Application:
The drill bit is used to drill holes in masonry, thanks to the
uniquely designed TCT (tungsten carbide tipped) point.
A percussion (hammer action) drill with a 3 jaw chuck is required. Preset the
depth gauge on the drill to achieve the correct depth before drilling into
walls.
TIP:
Have a wall scanner (detector) ready before drilling into walls.
CAUTION:
Do not use the drill bit with a rotary hammer. The impact energy will break
the conversion chuck.